The TPR2A modules are two pair audio receiving modules compatible with RDL Format A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The AF TPR2A is an APPFLEX series product that is compatible with various APPFLEX wall mount, cabinet mount and tabletop enclosures. The TPR2A modules feature two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard 10 dBV consumer level. This module receives signal from only two cable pairs, so the D, DS and AF modules have a second RJ45 jack to connect cables to additional receiver modules. Installers simply connect the conductors of two cables in parallel on the EM model terminal block. A separate single pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The TPR2A may be powered directly from a 24 Vdc power supply using the rear panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front panel LED. - Power Supply Included
- Two Unbalanced 10 dBV Phono Jack Audio Outputs.
- L Left Output From Pair B R Right From Pair C.
- Signal and Power Pair Pass Through on RJ45s.
- Remote Powering through Twisted Pair Cable.
- Fused Local Power Feeds all Connected Modules.
- Binding: Electronics
- Label: RDL
- Model: AF-TPR2A
- Product Group: CE
No comments:
Post a Comment